Bristan Sirrus Gummers Exposed Thermostatic Mixer Shower Valve 110mm 130mm 138mm

This Bristan Sirrus Gummers Traditional Shower Valve has fully adjustable pipe centres – Adjustable Elbows Meaning this shower will replace showers with 110mm centres, 130mm centres, 138mm centres as well as the industry standard 150mm, and anything inbetween! Elbows can be adjusted for exposed pipework running up and down the wall at the wide range of centres mentioned above.

Each Bristan Mini Valve comes with 2 sets of elbows allowing you to replace almost any shower mixer valve which has centres or 110mm or 155mm or anything inbetween.

Choose the correct elbow configuration to suit your Inlet centres:
2 x small elbows 110-130 centres
2 x large elbows 136-155
1 small elbow / 1 large elbow 125-145 Suitable for both domestic and commercial installations
Features

Single sequential control for both temperature and flow
Adjustable inlet centres mean you can use existing pipework with centres between 110mm and 155mm
High performance even at 0.5 bar inlet pressure
Automatic shutoff in the event of hot or cold water supply failure
Check valves and serviceable filters as standardChrome plated to BS EN 248.

Guarantee: 1 year covering manufacturing faults.

Valve Only – No Riser Kit Included