Handheld Dynamic Microphone Wired DJ PA Stage Karaoke & ¼” Cable For Singing

Handheld/Mountable Dynamic Microphone – General Purpose

Technical Spec;

Dynamic, Unidirectional Handheld design
Detachable 3m XLR Female to ¼†Jack cable included
Steel Mesh Windshield
Freq response 80Hz-14kHz
Sensitivity -68dB (+-3dB)
Impedance – 600Ohms

Overview – Ideal for vocalists, Compares, MCs, DJs, Karaoke setups and most other audio or P.A. applications, this compact and sturdy microphone is made of resilient plastic, enabling it to cope with the scrapes and impacts of the stage. The ‘Dynamic’-style circuit means the internals are all solidly mounted to prevent handling noise, so it can be held in the hand as well as being clipped to a stand. The end capsule itself is of a unidirectional design, meaning it will pick up sound equally well from any direction, making it ideal for those not familiar with microphone technique, such as karaoke users.

Compatibility – It includes a high quality 3m cable, with an XLR connector at the mic end, and a ¼†(6.35mm) mono jack plug at the other, making this microphone compatible with practically all mixers, amplifiers, karaoke machines, if you’re unsure if your device is compatible, check for a socket labelled ‘Input,’ ‘Mic’ or ‘Line-In.’ It should be a circular hole around ¼†in diameter, usually with a securing hexagonal nut around it.

The cable itself can be removed from the microphone, unlike many similar entry-level units. This allows the cable to be replaced, if, for instance, you need to connect the microphone to a device, that has a different connection such as XLR or 3.5mm. Our model includes a power switch to prevent feedback when not in use, and an incorporated foam windshield to prevent ‘popping’.

Further Info – Possessing a frequency response of 80Hz-14kHz, this microphone can capture the full range of the human voice, and with a sensitivity of -68dB, it will also be able to reproduce all its nuances with great clarity.

Size & Weight;

170mm – Length
50mm – Diameter of head
33mm – Thickest part of the stem

Standards – CE & ROHS Compliant