LITZEE Black Shower Barrier 2 ME Silicone Retention System, Shower Threshold Anti Overflow Rubber Water Dam Self Adhesive, Waterproof Door Seal For Bathroom Floor

• 【Installation Notes】:1. Around the Italian shower barrier needs to be sealed with additional sealing glue (package not included). 2. For better adhesion, you can heat the back glue with a hair dryer. 3. In the corner, we recommend you cut it to size. 45 degrees, and then connect two parts to ensure its firmness.
• 【Height 12mm/0.47in】: The height of the bathroom shower barrier is only 12 mm. As compared to; the collapsible shower tray seal, can not block the flow of water with a height > 12mm, but the small height will not cause obstacles to movement and can block the spread of water in a large area. Please clarify your needs before purchasing.
• < span class=”a-list- item”> 【Wide use】:1. The joint of the kitchen worktop at the edge of the worktop (kitchen sink, washbasin, window sill, tub edge) can be used. 2. Can be used on the floor (bathroom floor, shower tray, around the toilet or washing machine, balcony floor).3. It can be used as a threshold (bedroom door, bathroom door). 4. Can be used to block spaces from 0 to; 20 mm (between the countertop (bathtub, floor) and the wall.
• 【High quality silicone material】: the waterproof shower strip is made of food grade organic silicone, which is corrosion resistant, high temperature resistant, wear resistant and has no peculiar smell. It is flexible and can be cut as you like, and its smooth surface makes it very easy to clean.
• 【Quality Service】: If you are not satisfied after receiving the shower enclosure seal, please do not hesitate to contact us, we will we will provide the best solution within 24 hours.</ li>

Countertop Water Retention Strip
Our water retention strips can be used around the edge of the countertop sink. kitchen.the edge of the bathroom sink and the edge of the windowsill to avoid wetting the clothes and the floor, and keep the kitchen and bathroom or. clean and organized

Shower floor
The shower barrier can be used on the bathroom floor, the edge of the shower tray, as a threshold, and realize the effective separation of dry and wet.

p>

Filling the gap
The silicone water barrier can be used to fill the gaps, such as between the sink and the wall, between the bathtub and the wall, to prevent the water from getting into gaps, moldy and difficult to clean. clean.

Corner Decoration
Our shower threshold is designed for the right angle, which can fit the counter (floor) and wall well, can decorate the corners and crevices, and get the waterproofing effect.

Warm Tips for Installation

• Buy one size 5cm to 10cm longer than the requested length
• Clean the floor and dry it before laying.< /li>
• < span class=”a-list-item”>If the floor is uneven, fill it with silicone sealant before installation.
• Use plastic caulk silicone to coat the ends and edges of the shower water barrier.
• Once the installation is completed, it must be kept dry for 24 hours and postponed from 1 to 24 hours. 2 days in autumn and winter.
• Not folded loosely. It can only be installed in a straight line only.
• In the corner, cut a; 45 degrees, then season both sides to taste. 90 degrees.